-40%
Nano Coating for Bicycles Bikes Invisible Cloth Ceramic Metal protection Dirt
$ 5.7
- Description
- Size Guide
Description
NANO COATING FOR BICYCLES10/10ml
Easy-to-clean surface
Hydrophobic effect
Self-cleaning feature
Long-lasting effect (up to 2 years)
Areas of application:
for all types of painted/lacquered bicycle parts
Product description:
this coating is dedicated for preserving and conserving bicycle parts, thus
keeping its original looks for longer periods of time. This product creates a long lasting coating,
resistant to all types of negative environmental conditions (dirt, mud, salts etc.)
User instructions:
Before using this kit, make sure that the surface You‘re about to treat is clean, degreased & dry.
Insects, dirt, grease and dust must be thoroughly removed before using this coating kit (You can use
standard cleaners.) This kit contains skin drying components, hence using of nitrile gloves is
recommended.
I. STEP - PREPARATION
1. Open this compartment (left side of the
sachet) and remove the damp cloth.
2. Use the cloth to degrease the surface You’re
planning to coat.
3. Wait for 30-60 seconds until the surface is
completely dry.
II. STEP - COATING
1. Open this compartment (right side of the
sachet) and remove the damp cloth.
2. Using parallel overlapping strokes, coat the
desired surface – You can use the cloth until it
becomes completely dry.
3. When the cloth dries out, use a clean dry
microfiber cloth (or paper towel) to polish the
surface until it becomes shiny.
Attention: DO NOT touch, pollute and/or wet the surface for min. 2 hours (10-12 hrs is
recommended). In case of daily maintenance tasks, please use microfiber cloth dampened with
water. In case of direct contact of product with eyes and/or mouth, rinse with large quantities of
clean water.
Storage: keep between +5 and +25 °C, keep out of reach of children.