Adjustable Bicycle Side Support Kickstand Aluminium Alloy for 22 24 26in/700c

Description

Note:
This kickstand fits for 22" 24" 26" Bikes and 700c Road Bike, but not suitable for bike size below 22 inch or above 26 inch. Please contact us if you have any questions with the bike kickstand.
Pay attention to the position of the kickstand. If it is too far forward, the heel will easily be touched when riding.
Don’t twist the screws again after you tightening them, otherwise it is easy to make the thread worn down.
Wide Application
Suitable for most 22 24 26 inches bike and 700c road bike; Suitable for the rear chains tube diameter from 15 * 26mm to 22 * 30 mm
Adjustable Bicycle Kickstand
The kickstand could be easily adjust to the right height by loosening the middle screw with the attached hex wrench; The total length of the bike support ranges from 34 cm to 39 cm
Premium Material
Made of strong and durable Aluminum Alloy with anti-slip pad, can prevent the bicycle from slipping on wet surfaces
Easy Installation
This mountain bike kickstand with wrench to loosen the middle of screw, length can be adjustable. Package include free 4mm, 8mm wrench for you to easily install.
Non-slip Foot
The Aluminum Alloy Bicycle Kickstand comes with an wide anti-slip reinforced rubber foot to prevent slipping on wet surfaces and sinking in mud.
Wide Application
Suitable for most 22 24 26 inches bike and 700c road bike; Suitable for the rear chains tube diameter from 15 * 26mm to 22 * 30 mm.
Non-slip Foot
The Aluminum Alloy Bicycle Kickstand comes with an wide anti-slip reinforced rubber foot to prevent slipping on wet surfaces and sinking in mud.
Easy Installation
This mountain bike kickstand with wrench to loosen the middle of screw, length can be adjustable. Package include free 4mm, 8mm wrench for you to easily install.
How to Install This Bike Kickstand?
Remove three screws with the 5mm hexagon wrench.
Align the aluminum alloy sheets with the inner rubber mats to the chain stay tube, then tighten the screws.
Try to put down the kickstand, and check if the bike is balanced.
If not, use the 4mm hexagon wrench to loosen the screw in the middle of the kickstand and tighten the screw after adjusting to the appropriate height.
Specification
:
Material: Aluminum Alloy & Rubber
Weight: 320g
Size: Width: 4.5cm, Length: 35cm~39cm
Oval Tube: 15-22mm*26mm; Square Tube: 15-22mm*30mm
Package Includes:
1 × Kickstand
1 × 4mm Hexagon Wrench
1 × 5mm Hexagon Wrench